In the past if you wanted to run an IP PBX platform on Windows, your only choice was to run Linux and an IP PBX like Asterisk or trixbox CE under VMWare or other virtualization method. While this would mostly work out ok, Asterisk can have issues with timing under VMWare which can cause [...]

If you have ever tried to configure a Cisco 7975 phone with third-part IP PBX system like trixbox Pro or 3CX, you know what a pain these phones can be. VoipStore.com has just posted a new article on this along with working configuration files and a step-by-step guide to how to edit them for your [...]

With the lastest firmware (v6.1.3), the Linksys SPA-942 can now suppoprt BLF on Asterisk systems. Implementing it is actually quite simple as we will see in this article. If you aren’t familair with BLF, this is called Busy Lamp Field and is used to show the status of another extension and to act as a [...]

Are you trying to get a grasp of how to create a good inbound dialplan when using trixbox CE? This article contains a video from our friends over at AsteriskTutorials.com that walks you through the design of a typical small – medium office call tree, how to flow chart the system, and then every aspect [...]

LOS ANGELES – April 15, 2008 – Fonality®, the leading open source phone systems provider, today announced the release of trixbox® Pro 2.0, a major new release created specifically for resellers participating in the fast-growing open source telephony market. trixbox Pro 2.0 incorporates new features for greater flexibility in setting up and managing trixbox deployments, [...]

The Linksys SPA-3102 is a cool little device that can convert your analog phone line into a SIP trunk into your trixbox or Asterisk PBX PBX system. The problem is most people have a ton of problems getting them to work properly.
While there are a ton of settings, there are really only about 7 [...]